Предыдущая тема :: Следующая тема |
Автор |
Сообщение |
podlec Associated member
Зарегистрирован: 02.03.2006 Сообщения: 9
|
Добавлено: Чт Мар 02, 2006 9:51 pm Заголовок сообщения: Нужна Ваша помощь. |
|
|
Цитата: | Inpro IDC Modems Diagnostics, Version: 1.1.4.39
02.03.2006 21:19:48 - Direct Log Write Entry
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: <none>
Time Online.................. 00:00:00
Termination Reason........... NONE
Tx Rate (Last/Init/Min/Max).. NA
Rx Rate (Last/Init/Min/Max).. NA
Modulation................... NA
Protocol/Compression......... NA
Line Quality................. NA
Tx/Power Drop/Rx Level....... 9/NA/NA
SNR Last/Min/Max............. NA/NA/NA
Highest Rx/Tx State.......... 00/00
EQM Sum...................... NA
RBS Pattern.................. NA
Rate Drop.................... NA
Digital Loss................. None
Retrains Issued/Granted/Auto. 0/0/0
Renegs Issued/Granted........ 0/0
FForwards/FBacks/FEQM/Denied. 0/0/0/0
Forced FB/FB after FF/MaxREJ. 0/0/0
Last dialed number........... NA
Flex fail
No extended statistics data available.
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
02.03.2006 22:42:47 - Outbound Call By RemoteAccess
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: <none>
Time Online.................. 01:17:46
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/28800/24000/31200 bps
Rx Rate (Last/Init/Min/Max).. 45333/44000/40000/46667 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 34
Tx/Power Drop/Rx Level....... 15/3/19
SNR Last/Min/Max............. 43/41/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 00D9
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/1/5
Renegs Issued/Granted........ 30/0
FForwards/FBacks/FEQM/Denied. 8/22/21/0
Forced FB/FB after FF/MaxREJ. 0/1/1
Last dialed number........... P71111
V90 9481834347EB
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1829
EQM Value (Last/Min/Max)..... 34/11/127
EQM Hits..................... 0
EQM Last 10 Readings......... 29 30 32 31 33 33 32 32 29 31
Fast Retrains (RRWS) Count... 8
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallforward due to Low EQM
Last Retrain/Reneg Time...... 16 minutes ago
Handshake Time/Retries....... 36 seconds/0
Non-linear Encoding, Rx/Tx... OFF/ON
Precoding, Rx/Tx............. OFF/ON
Shaping, Rx/Tx............... OFF/ON
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 1
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,8
Last Rx/Tx State............. 67/87
Energy at 3750Hz/Average .... 2095/1159
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 18,7/18,7/18,7
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... No Limit (Reg.S120=0)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 03
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Unknown
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/10
Frames Errors, Rx/Tx......... 10/0 (0,0%/0,0%)
Frames Count, Rx/Tx.......... 25705/7457
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 23
Error Control Link NAKs...... 0
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 3 875 710
Characters Sent.............. 395 536
Average CPS, Rx/Tx........... 830/84
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62 |
|
|
Вернуться к началу |
|
|
Technical Support Expert
Зарегистрирован: 31.10.2002 Сообщения: 6330
|
Добавлено: Чт Мар 02, 2006 10:30 pm Заголовок сообщения: |
|
|
Пропишите в строке инициализации в свойствах модема такие команды:
S91=18 S210.7=1 S55.4=1 S202.3=1 S17=64
и пересоберите статистику. _________________ Inpro
Technical Support |
|
Вернуться к началу |
|
|
podlec Associated member
Зарегистрирован: 02.03.2006 Сообщения: 9
|
Добавлено: Пт Мар 03, 2006 7:14 am Заголовок сообщения: |
|
|
ок |
|
Вернуться к началу |
|
|
podlec Associated member
Зарегистрирован: 02.03.2006 Сообщения: 9
|
Добавлено: Пт Мар 03, 2006 9:25 pm Заголовок сообщения: |
|
|
Цитата: | Inpro IDC Modems Diagnostics, Version: 1.1.4.39
02.03.2006 21:19:48 - Direct Log Write Entry
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: <none>
Time Online.................. 00:00:00
Termination Reason........... NONE
Tx Rate (Last/Init/Min/Max).. NA
Rx Rate (Last/Init/Min/Max).. NA
Modulation................... NA
Protocol/Compression......... NA
Line Quality................. NA
Tx/Power Drop/Rx Level....... 9/NA/NA
SNR Last/Min/Max............. NA/NA/NA
Highest Rx/Tx State.......... 00/00
EQM Sum...................... NA
RBS Pattern.................. NA
Rate Drop.................... NA
Digital Loss................. None
Retrains Issued/Granted/Auto. 0/0/0
Renegs Issued/Granted........ 0/0
FForwards/FBacks/FEQM/Denied. 0/0/0/0
Forced FB/FB after FF/MaxREJ. 0/0/0
Last dialed number........... NA
Flex fail
No extended statistics data available.
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
02.03.2006 22:42:47 - Outbound Call By RemoteAccess
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: <none>
Time Online.................. 01:17:46
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/28800/24000/31200 bps
Rx Rate (Last/Init/Min/Max).. 45333/44000/40000/46667 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 34
Tx/Power Drop/Rx Level....... 15/3/19
SNR Last/Min/Max............. 43/41/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 00D9
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/1/5
Renegs Issued/Granted........ 30/0
FForwards/FBacks/FEQM/Denied. 8/22/21/0
Forced FB/FB after FF/MaxREJ. 0/1/1
Last dialed number........... P71111
V90 9481834347EB
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1829
EQM Value (Last/Min/Max)..... 34/11/127
EQM Hits..................... 0
EQM Last 10 Readings......... 29 30 32 31 33 33 32 32 29 31
Fast Retrains (RRWS) Count... 8
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallforward due to Low EQM
Last Retrain/Reneg Time...... 16 minutes ago
Handshake Time/Retries....... 36 seconds/0
Non-linear Encoding, Rx/Tx... OFF/ON
Precoding, Rx/Tx............. OFF/ON
Shaping, Rx/Tx............... OFF/ON
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 1
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,8
Last Rx/Tx State............. 67/87
Energy at 3750Hz/Average .... 2095/1159
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 18,7/18,7/18,7
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... No Limit (Reg.S120=0)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 03
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Unknown
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/10
Frames Errors, Rx/Tx......... 10/0 (0,0%/0,0%)
Frames Count, Rx/Tx.......... 25705/7457
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 23
Error Control Link NAKs...... 0
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 3 875 710
Characters Sent.............. 395 536
Average CPS, Rx/Tx........... 830/84
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
02.03.2006 22:56:32 - Outbound Call By RemoteAccess
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: <none>
Time Online.................. 00:11:56
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/26400/26400/31200 bps
Rx Rate (Last/Init/Min/Max).. 36000/44000/34667/48000 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 3
Tx/Power Drop/Rx Level....... 15/2/19
SNR Last/Min/Max............. 43/43/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 00D4
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/1/1
Renegs Issued/Granted........ 15/0
FForwards/FBacks/FEQM/Denied. 5/10/10/0
Forced FB/FB after FF/MaxREJ. 0/2/1
Last dialed number........... P71111
V90 9481834246E0
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1920
EQM Value (Last/Min/Max)..... 3/1/124
EQM Hits..................... 0
EQM Last 10 Readings......... 3 3 3 2 2 3 3 1 4 3
Fast Retrains (RRWS) Count... 4
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallforward due to Low EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 35 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 6
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,5
Last Rx/Tx State............. 65/87
Energy at 3750Hz/Average .... 2148/1051
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 18,7/18,7/18,7
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... No Limit (Reg.S120=0)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... External
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/7
Frames Errors, Rx/Tx......... 7/10 (0,1%/0,4%)
Frames Count, Rx/Tx.......... 5589/2640
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 7
Error Control Link NAKs...... 10
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 938 867
Characters Sent.............. 269 380
Average CPS, Rx/Tx........... 1311/376
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
02.03.2006 22:56:44 - Direct Log Write Entry
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: <none>
Time Online.................. 00:11:56
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/26400/26400/31200 bps
Rx Rate (Last/Init/Min/Max).. 36000/44000/34667/48000 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 3
Tx/Power Drop/Rx Level....... 15/2/19
SNR Last/Min/Max............. 43/43/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 00D4
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/1/1
Renegs Issued/Granted........ 15/0
FForwards/FBacks/FEQM/Denied. 5/10/10/0
Forced FB/FB after FF/MaxREJ. 0/2/1
Last dialed number........... P71111
V90 9481834246E0
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1920
EQM Value (Last/Min/Max)..... 3/1/124
EQM Hits..................... 0
EQM Last 10 Readings......... 3 3 3 2 2 3 3 1 4 3
Fast Retrains (RRWS) Count... 4
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallforward due to Low EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 35 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 6
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,5
Last Rx/Tx State............. 65/87
Energy at 3750Hz/Average .... 2148/1051
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 18,7/18,7/18,7
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... No Limit (Reg.S120=0)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... External
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/7
Frames Errors, Rx/Tx......... 7/10 (0,1%/0,4%)
Frames Count, Rx/Tx.......... 5589/2640
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 7
Error Control Link NAKs...... 10
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 938 867
Characters Sent.............. 269 380
Average CPS, Rx/Tx........... 1311/376
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
02.03.2006 22:56:48 - Direct Log Write Entry
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: <none>
Time Online.................. 00:11:56
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/26400/26400/31200 bps
Rx Rate (Last/Init/Min/Max).. 36000/44000/34667/48000 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 3
Tx/Power Drop/Rx Level....... 15/2/19
SNR Last/Min/Max............. 43/43/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 00D4
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/1/1
Renegs Issued/Granted........ 15/0
FForwards/FBacks/FEQM/Denied. 5/10/10/0
Forced FB/FB after FF/MaxREJ. 0/2/1
Last dialed number........... P71111
V90 9481834246E0
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1920
EQM Value (Last/Min/Max)..... 3/1/124
EQM Hits..................... 0
EQM Last 10 Readings......... 3 3 3 2 2 3 3 1 4 3
Fast Retrains (RRWS) Count... 4
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallforward due to Low EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 35 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 6
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,5
Last Rx/Tx State............. 65/87
Energy at 3750Hz/Average .... 2148/1051
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 18,7/18,7/18,7
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... No Limit (Reg.S120=0)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... External
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/7
Frames Errors, Rx/Tx......... 7/10 (0,1%/0,4%)
Frames Count, Rx/Tx.......... 5589/2640
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 7
Error Control Link NAKs...... 10
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 938 867
Characters Sent.............. 269 380
Average CPS, Rx/Tx........... 1311/376
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
03.03.2006 21:10:54 - Outbound Call By RemoteAccess
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: <none>
Time Online.................. 00:05:25
Termination Reason........... NO REMOTE RESPONSE
Tx Rate (Last/Init/Min/Max).. 26400/28800/24000/31200 bps
Rx Rate (Last/Init/Min/Max).. 40000/40000/40000/45333 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 126
Tx/Power Drop/Rx Level....... 15/2/19
SNR Last/Min/Max............. 43/37/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 00EE
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/0/2
Renegs Issued/Granted........ 14/0
FForwards/FBacks/FEQM/Denied. 4/10/9/0
Forced FB/FB after FF/MaxREJ. 0/1/1
Last dialed number........... P71111
V90 9481834347EB
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1829
EQM Value (Last/Min/Max)..... 126/14/127
EQM Hits..................... 0
EQM Last 10 Readings......... 127 127 126 127 127 127 25 22 29 26
Fast Retrains (RRWS) Count... 3
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallback due to High EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 36 seconds/0
Non-linear Encoding, Rx/Tx... OFF/ON
Precoding, Rx/Tx............. OFF/ON
Shaping, Rx/Tx............... OFF/ON
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 1
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,5
Last Rx/Tx State............. 61/84
Energy at 3750Hz/Average .... 1963/1133
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 19,0/19,0/18,7
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... 40000 bps (Reg.S120=10)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 03
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Unknown
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 6/1
Frames Errors, Rx/Tx......... 1/0 (0,1%/0,0%)
Frames Count, Rx/Tx.......... 766/474
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 0
Error Control Link NAKs...... 0
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 156 138
Characters Sent.............. 72 752
Average CPS, Rx/Tx........... 480/223
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
03.03.2006 22:20:58 - Outbound Call By RemoteAccess
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: S91=18 S210.7=1 S55.4=1 S202.3=1 S17=64
Time Online.................. 01:05:56
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/24000/24000/28800 bps
Rx Rate (Last/Init/Min/Max).. 34667/40000/32000/40000 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 3
Tx/Power Drop/Rx Level....... 18/0/19
SNR Last/Min/Max............. 43/43/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 00BD
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/0/2
Renegs Issued/Granted........ 23/2
FForwards/FBacks/FEQM/Denied. 5/18/15/0
Forced FB/FB after FF/MaxREJ. 2/3/7
Last dialed number........... P71111
V90 9481834246E0
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1920
EQM Value (Last/Min/Max)..... 3/2/127
EQM Hits..................... 0
EQM Last 10 Readings......... 3 2 2 2 2 3 2 4 3 3
Fast Retrains (RRWS) Count... 6
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallforward due to Low EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 35 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 6
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,5
Last Rx/Tx State............. 65/87
Energy at 3750Hz/Average .... 1983/1022
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 18,3/18,3/18,3
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... 37333 bps (Reg.S120=
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Internal
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/38
Frames Errors, Rx/Tx......... 38/49 (0,1%/0,4%)
Frames Count, Rx/Tx.......... 34469/12012
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 65
Error Control Link NAKs...... 49
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 2 640 162
Characters Sent.............. 502 247
Average CPS, Rx/Tx........... 667/126
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
03.03.2006 22:21:01 - Direct Log Write Entry
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: S91=18 S210.7=1 S55.4=1 S202.3=1 S17=64
Time Online.................. 01:05:56
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/24000/24000/28800 bps
Rx Rate (Last/Init/Min/Max).. 34667/40000/32000/40000 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 3
Tx/Power Drop/Rx Level....... 18/0/19
SNR Last/Min/Max............. 43/43/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 00BD
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/0/2
Renegs Issued/Granted........ 23/2
FForwards/FBacks/FEQM/Denied. 5/18/15/0
Forced FB/FB after FF/MaxREJ. 2/3/7
Last dialed number........... P71111
V90 9481834246E0
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1920
EQM Value (Last/Min/Max)..... 3/2/127
EQM Hits..................... 0
EQM Last 10 Readings......... 3 2 2 2 2 3 2 4 3 3
Fast Retrains (RRWS) Count... 6
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallforward due to Low EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 35 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 6
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,5
Last Rx/Tx State............. 65/87
Energy at 3750Hz/Average .... 1983/1022
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 18,3/18,3/18,3
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... 37333 bps (Reg.S120=
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Internal
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/38
Frames Errors, Rx/Tx......... 38/49 (0,1%/0,4%)
Frames Count, Rx/Tx.......... 34469/12012
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 65
Error Control Link NAKs...... 49
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 2 640 162
Characters Sent.............. 502 247
Average CPS, Rx/Tx........... 667/126
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
03.03.2006 22:21:05 - Direct Log Write Entry
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: S91=18 S210.7=1 S55.4=1 S202.3=1 S17=64
Time Online.................. 01:05:56
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/24000/24000/28800 bps
Rx Rate (Last/Init/Min/Max).. 34667/40000/32000/40000 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 3
Tx/Power Drop/Rx Level....... 18/0/19
SNR Last/Min/Max............. 43/43/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 00BD
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/0/2
Renegs Issued/Granted........ 23/2
FForwards/FBacks/FEQM/Denied. 5/18/15/0
Forced FB/FB after FF/MaxREJ. 2/3/7
Last dialed number........... P71111
V90 9481834246E0
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1920
EQM Value (Last/Min/Max)..... 3/2/127
EQM Hits..................... 0
EQM Last 10 Readings......... 3 2 2 2 2 3 2 4 3 3
Fast Retrains (RRWS) Count... 6
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallforward due to Low EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 35 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 6
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,5
Last Rx/Tx State............. 65/87
Energy at 3750Hz/Average .... 1983/1022
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 18,3/18,3/18,3
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... 37333 bps (Reg.S120=
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Internal
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/38
Frames Errors, Rx/Tx......... 38/49 (0,1%/0,4%)
Frames Count, Rx/Tx.......... 34469/12012
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 65
Error Control Link NAKs...... 49
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 2 640 162
Characters Sent.............. 502 247
Average CPS, Rx/Tx........... 667/126
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62 |
|
|
Вернуться к началу |
|
|
Technical Support Expert
Зарегистрирован: 31.10.2002 Сообщения: 6330
|
Добавлено: Сб Мар 04, 2006 9:23 am Заголовок сообщения: |
|
|
Просьба: когда вставляете статистику в тему, то:
1. Размещайте только последнюю статистику, а не "всё от Рождества Христова".
2. Не нужно вставлять статитику одного и того же сеанса несколько раз.
3. Статистику размещайте в тэгах {Code} (а не {Quote}, как в последний рах).
Ну вот и всё по организационным вопросам. Теперь расскажите, на что Вы жалуетесь? _________________ Inpro
Technical Support |
|
Вернуться к началу |
|
|
podlec Associated member
Зарегистрирован: 02.03.2006 Сообщения: 9
|
Добавлено: Сб Мар 04, 2006 7:30 pm Заголовок сообщения: |
|
|
Прежний владелец модема объяснил порядок действий для улучшения качества работы. Ну а изначально дело в том, что живу я в том городе, где хорошие или новые Станции (АТС) и вообще всё оборудование для обеспечения людей хорошей качественной связью - это фантастика, соответственно Интернет постоянно слетает, скорость ужасная и вообще всё плохо.
Код: | Inpro IDC Modems Diagnostics, Version: 1.1.4.39
04.03.2006 18:45:02 - Outbound Call By RemoteAccess
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: S91=18 S210.7=1 S55.4=1 S202.3=1 S17=64
Time Online.................. 00:40:03
Termination Reason........... NO REMOTE RESPONSE
Tx Rate (Last/Init/Min/Max).. 26400/26400/24000/28800 bps
Rx Rate (Last/Init/Min/Max).. 37333/45333/33333/45333 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 55
Tx/Power Drop/Rx Level....... 18/0/25
SNR Last/Min/Max............. 43/39/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 0105
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/0/10
Renegs Issued/Granted........ 19/5
FForwards/FBacks/FEQM/Denied. 1/18/16/0
Forced FB/FB after FF/MaxREJ. 0/1/3
Last dialed number........... P71111
V90 9481834246E0
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1920
EQM Value (Last/Min/Max)..... 55/2/127
EQM Hits..................... 0
EQM Last 10 Readings......... 127 34 29 33 33 35 33 29 29 27
Fast Retrains (RRWS) Count... 3
Last Retrain/Reneg Status.... Local Rate Renegotiation
Last Retrain/Reneg Reason.... Local Fallback due to High EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 35 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 6
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,2
Last Rx/Tx State............. 67/84
Energy at 3750Hz/Average .... 2014/1028
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 25,3/25,3/18,3
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... 37333 bps (Reg.S120=8)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Internal
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 0/15
Frames Errors, Rx/Tx......... 15/13 (0,1%/0,2%)
Frames Count, Rx/Tx.......... 15230/7576
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 35
Error Control Link NAKs...... 13
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 1 621 704
Characters Sent.............. 319 181
Average CPS, Rx/Tx........... 674/132
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 68
Inpro IDC Modems Diagnostics, Version: 1.1.4.39
04.03.2006 18:45:08 - Direct Log Write Entry
--------------------------------------------------------
Modem Type: IDC-5614BXL/VR+ (Plus) Firmware Revision: V2.26
System Modem Init String: AT&FS38=0S95=41S115=0E0<cr>
User Modem Init String: S91=18 S210.7=1 S55.4=1 S202.3=1 S17=64
Time Online.................. 00:40:03
Termination Reason........... NO REMOTE RESPONSE
Tx Rate (Last/Init/Min/Max).. 26400/26400/24000/28800 bps
Rx Rate (Last/Init/Min/Max).. 37333/45333/33333/45333 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 55
Tx/Power Drop/Rx Level....... 18/0/25
SNR Last/Min/Max............. 43/39/43
Highest Rx/Tx State.......... 67/87
EQM Sum...................... 0105
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 0/0/10
Renegs Issued/Granted........ 19/5
FForwards/FBacks/FEQM/Denied. 1/18/16/0
Forced FB/FB after FF/MaxREJ. 0/1/3
Last dialed number........... P71111
V90 9481834246E0
Negotiation Result (Rx/Tx)... V.90 Issue 1 (asymmetric)/V.34
Symbol Rate (Rx/Tx).......... 8000/3200
Carrier Frequency Hz, Tx..... 1920
EQM Value (Last/Min/Max)..... 55/2/127
EQM Hits..................... 0
EQM Last 10 Readings......... 127 34 29 33 33 35 33 29 29 27
Fast Retrains (RRWS) Count... 3
Last Retrain/Reneg Status.... Local Rate Renegotiation
Last Retrain/Reneg Reason.... Local Fallback due to High EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 35 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 6
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 3,2
Last Rx/Tx State............. 67/84
Energy at 3750Hz/Average .... 2014/1028
Auto Gain Amplitude, db...... 10
Rx Level (Last/Min/Max), -dB. 25,3/25,3/18,3
Detection of 120 Hz Tones.... Yes
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... 37333 bps (Reg.S120=8)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Internal
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 0/15
Frames Errors, Rx/Tx......... 15/13 (0,1%/0,2%)
Frames Count, Rx/Tx.......... 15230/7576
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 35
Error Control Link NAKs...... 13
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 1 621 704
Characters Sent.............. 319 181
Average CPS, Rx/Tx........... 674/132
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 68 |
|
|
Вернуться к началу |
|
|
Technical Support Expert
Зарегистрирован: 31.10.2002 Сообщения: 6330
|
Добавлено: Сб Мар 04, 2006 7:47 pm Заголовок сообщения: |
|
|
Пожалуйста, сообщите серийный номер Вашего модема (он - на наклейке на "донышке").
Заземлён ли Ваш компьютер? _________________ Inpro
Technical Support |
|
Вернуться к началу |
|
|
podlec Associated member
Зарегистрирован: 02.03.2006 Сообщения: 9
|
Добавлено: Сб Мар 04, 2006 10:43 pm Заголовок сообщения: |
|
|
152-00200975, заземлён... |
|
Вернуться к началу |
|
|
Technical Support Expert
Зарегистрирован: 31.10.2002 Сообщения: 6330
|
Добавлено: Вс Мар 05, 2006 10:03 am Заголовок сообщения: |
|
|
А нет ли у Вас вольтметра переменного тока? Нужно измерить переменное напряжение между "землёй" (корпусом компьютера) и каждым из проводов телефонной линии.
Чтобы было понятно, что происходит: статистика показывает наличие мощных помех. Пытаемся найти их источник... _________________ Inpro
Technical Support |
|
Вернуться к началу |
|
|
podlec Associated member
Зарегистрирован: 02.03.2006 Сообщения: 9
|
Добавлено: Вс Мар 05, 2006 12:11 pm Заголовок сообщения: |
|
|
Померю завтра. Имеет смысл перепрокинуть линию? В данный момент используется телефонный провод "лапша", а если попробовать кинуть витую пару непосредственно от РШ до модема. |
|
Вернуться к началу |
|
|
Technical Support Expert
Зарегистрирован: 31.10.2002 Сообщения: 6330
|
Добавлено: Пн Мар 06, 2006 12:58 am Заголовок сообщения: |
|
|
Врядли дело в "лапше", тут что-то более сильное. Скорее, дело в заземлении, или стоит какой-нибудь телефонный аппарат с АОН параллельно модему... _________________ Inpro
Technical Support |
|
Вернуться к началу |
|
|
podlec Associated member
Зарегистрирован: 02.03.2006 Сообщения: 9
|
Добавлено: Вт Мар 07, 2006 6:00 pm Заголовок сообщения: |
|
|
параллельно включений нет |
|
Вернуться к началу |
|
|
podlec Associated member
Зарегистрирован: 02.03.2006 Сообщения: 9
|
Добавлено: Вт Мар 07, 2006 10:26 pm Заголовок сообщения: |
|
|
на первом 143 В, на втором не меняется... |
|
Вернуться к началу |
|
|
Technical Support Expert
Зарегистрирован: 31.10.2002 Сообщения: 6330
|
Добавлено: Вт Мар 07, 2006 11:41 pm Заголовок сообщения: |
|
|
Тогда, скорее всего, помехи приходят по "земле". Для проверки лучше всего замерить переменное напряжение между корпусом и каждым из проводов телефонной линии. Результаты обеих замеров не должны превышать 1В. _________________ Inpro
Technical Support |
|
Вернуться к началу |
|
|
podlec Associated member
Зарегистрирован: 02.03.2006 Сообщения: 9
|
Добавлено: Ср Мар 08, 2006 1:20 pm Заголовок сообщения: |
|
|
Заземления у корпуса отдельно нет, напряжение между одним проводом и корпусом не показывает, между вторым проводом 124 В при шкале на 750 В и 143 В при шкале на 200В. Компьютер при измерениях был включен. |
|
Вернуться к началу |
|
|
|
|
Вы не можете начинать темы Вы не можете отвечать на сообщения Вы не можете редактировать свои сообщения Вы не можете удалять свои сообщения Вы не можете голосовать в опросах
|
Powered by phpBB © 2001, 2005 phpBB Group
|