Возможно ли в моем случае улучшить коннект?

[Ruslan]

Возможно ли в моем случае улучшить коннект?

[Technical Support]

Попробуйте такую строку инициализации:

S91=15 S210.7=1 S17=56
_________________
Inpro
Technical Support

[Ruslan]

[Technical Support]

[Ruslan]

А счастье было так возможно ...

И на том спасибо!

[Ruslan]

Да, вот еще что, строка инициализации зависит только от линии или от с каким провайдером тоже?

[Technical Support]

Настройки модема оптимизируются под конкретные условия. Условия определяются качеством канала связи и модемом на другой стороне. Меняете провайдера, и оба определяющих параметра изменяются.
_________________
Inpro
Technical Support

[Ruslan]

Хорошо, позже дам статистику с другим провом ...

Так, а если заземлить комп, ситуация с линией не улучшится случайно?

[Technical Support]

Заземление вполне может улучшить качество связи и совершенно точно поможет в случае "грозы на линии".

В Вашей ситуации можно также попробовать добавить в строку инициализации команду:

S55.4=1
_________________
Inpro
Technical Support

[Ruslan]

После добавки картина следующая:

[Technical Support]

Вот так и оставьте.
_________________
Inpro
Technical Support

[micro]

А в моем случаи можно улучшить коннект?
А то бывает что приходится нажимать обновить несколько раз чтобы странница начила грузится.
Что вы можете вобше сказать про мой коннект?

Inpro IDC Modems Diagnostics, Version 1.0.1.31
22.12.2003 19:47:47 - Direct Log Write Entry
--------------------------------------------------------
Modem type: IDC-5614BXL/VR+ (Plus) Firmware revision: V2.24

Time Online.................. 00:03:30
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/28800/28800/31200 bps
Rx Rate (Last/Init/Min/Max).. 48000/46667/46667/53333 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 12
Tx/Power Drop/Rx Level....... 15/2/16
SNR Last/Min/Max............. 43/43/43
Highest Rx/Tx State.......... 83/87
EQM Sum...................... 00B5
RBS Pattern.................. 00
Rate Drop.................... 1
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 1/0/0
Renegs Issued/Granted........ 5/0
FForwards/FBacks/Denied...... 5/1/0
Forced FB/FB after FF/MaxREJ. 0/1/1
Last dialed number........... P707070
V90 9481834246E0


Symbol Rate.................. 3200
Carrier Frequency Hz, Tx..... 1829
EQM Value (Last/Min/Max)..... 12/12/127
EQM Hits..................... 0
EQM Last 10 Readings......... 17 15 17 16 17 17 15 17 16 18
Last Retrain/Reneg Status.... Local Fast Retrain
Last Retrain/Reneg Reason.... Local Fallforward due to Low EQM
Last Retrain/Reneg Time...... 1 minutes ago
Handshake Time/Retries....... 22 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 1
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 2,6
Last Rx/Tx State............. 67/87
Energy at 3750Hz/Average .... 4303/2038
Auto Gain Amplitude, db...... 10
Last AGC Gain Value.......... 97
Minimum AGC Gain Value....... 97
Maximum AGC Gain Value....... 97
Detection of 120 Hz Tones.... No
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... No Limit (Reg.S120=0)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Internal
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/3
Frames Errors, Rx/Tx......... 3/0 (0,3%/0,0%)
Frames Count, Rx/Tx.......... 1177/521
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 1
Error Control Link NAKs...... 0
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 135231
Characters Sent.............. 33188
Average CPS, Rx/Tx........... 643/158
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 59

[Technical Support]

Пропишите такую строку инициализации:

S91=15 S210.7=1 S17=52 S202.3=1

и пересоберите статистику. Желательно, чтобы сеанс длился не менее 10 минут и чтобы при этом интенсивно принимались данные.
_________________
Inpro
Technical Support

[micro]

Вот что теперь получилось.
Коннект стал на 50.6 ранешь был на 46.6 до 48.0.У меня два провайдера на них скорость одинаковая.
Ну я бы не сказал что дучше после тех настроект стало помоемому только хуже.

Inpro IDC Modems Diagnostics, Version 1.0.1.31
22.12.2003 20:58:31 - Direct Log Write Entry
--------------------------------------------------------
Modem type: IDC-5614BXL/VR+ (Plus) Firmware revision: V2.24

Time Online.................. 00:13:23
Termination Reason........... NO REMOTE RESPONSE
Tx Rate (Last/Init/Min/Max).. 28800/28800/28800/28800 bps
Rx Rate (Last/Init/Min/Max).. 41333/50667/40000/50667 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 126
Tx/Power Drop/Rx Level....... 15/0/19
SNR Last/Min/Max............. 43/43/43
Highest Rx/Tx State.......... 45/87
EQM Sum...................... 007E
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 9/0/0
Renegs Issued/Granted........ 9/0
FForwards/FBacks/Denied...... 5/13/0
Forced FB/FB after FF/MaxREJ. 5/4/8
Last dialed number........... P735000
V90 9481834347E8


Symbol Rate.................. 3200
Carrier Frequency Hz, Tx..... 1829
EQM Value (Last/Min/Max)..... 126/4/127
EQM Hits..................... 0
EQM Last 10 Readings......... 127 127 126 125 127 127 20 11 29 6
Last Retrain/Reneg Status.... Local Retrain
Last Retrain/Reneg Reason.... Local Fallback due to High EQM
Last Retrain/Reneg Time...... 0 minutes ago
Handshake Time/Retries....... 20 seconds/0
Non-linear Encoding, Rx/Tx... OFF/ON
Precoding, Rx/Tx............. OFF/ON
Shaping, Rx/Tx............... OFF/ON
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 2
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 2,3
Last Rx/Tx State............. 45/60
Energy at 3750Hz/Average .... 3468/1862
Auto Gain Amplitude, db...... 10
Last AGC Gain Value.......... 89
Minimum AGC Gain Value....... 89
Maximum AGC Gain Value....... 97
Detection of 120 Hz Tones.... No
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... 42667 bps (Reg.S120=12)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 03
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Internal
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 5/140
Frames Errors, Rx/Tx......... 140/0 (0,8%/0,0%)
Frames Count, Rx/Tx.......... 18563/4518
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 26
Error Control Link NAKs...... 0
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 2364637
Characters Sent.............. 227401
Average CPS, Rx/Tx........... 2944/283
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 62

[micro]

Да даже хуже стало после этих настроек вот первый правайдр там где я писал самого начала.
Коннект здесь вобше стал 42.0 41.0.

Inpro IDC Modems Diagnostics, Version 1.0.1.31
22.12.2003 21:05:24 - Direct Log Write Entry
--------------------------------------------------------
Modem type: IDC-5614BXL/VR+ (Plus) Firmware revision: V2.24

Time Online.................. 00:05:00
Termination Reason........... LOCAL REQUEST
Tx Rate (Last/Init/Min/Max).. 28800/28800/28800/28800 bps
Rx Rate (Last/Init/Min/Max).. 40000/42667/40000/45333 bps
Modulation................... V.90
Protocol/Compression......... LAP-M/V.42bis
Line Quality................. 12
Tx/Power Drop/Rx Level....... 15/0/16
SNR Last/Min/Max............. 43/43/43
Highest Rx/Tx State.......... 65/67
EQM Sum...................... 0083
RBS Pattern.................. 00
Rate Drop.................... 0
Digital Loss................. 2000
Retrains Issued/Granted/Auto. 3/0/0
Renegs Issued/Granted........ 2/0
FForwards/FBacks/Denied...... 2/3/0
Forced FB/FB after FF/MaxREJ. 0/1/5
Last dialed number........... P707070
V90 9481834246E0


Symbol Rate.................. 3200
Carrier Frequency Hz, Tx..... 1829
EQM Value (Last/Min/Max)..... 12/6/127
EQM Hits..................... 0
EQM Last 10 Readings......... 20 10 10 33 20 10 22 12 9 12
Last Retrain/Reneg Status.... Local Retrain
Last Retrain/Reneg Reason.... Local Fallback due to High EQM
Last Retrain/Reneg Time...... 1 minutes ago
Handshake Time/Retries....... 21 seconds/0
Non-linear Encoding, Rx/Tx... OFF/OFF
Precoding, Rx/Tx............. OFF/OFF
Shaping, Rx/Tx............... OFF/OFF
Trellis Encoding, Tx......... 16 state
Pre-Emphasis Index, Tx....... 1
Band Edges Lower/Upper, Hz... 150/3825
Round trip delay, ms......... 2,6
Last Rx/Tx State............. 65/67
Energy at 3750Hz/Average .... 4295/2035
Auto Gain Amplitude, db...... 10
Last AGC Gain Value.......... 97
Minimum AGC Gain Value....... 97
Maximum AGC Gain Value....... 97
Detection of 120 Hz Tones.... No
Detection of Dual PCM........ No
V.90 RBS Pattern............. 00
V.90 Alternating RBS Pattern. 00
V.90 Digital Pad Value, db... 0,0
V.90 Optimal Speed........... 41333 bps (Reg.S120=11)
V.8 Negotiation Started...... Yes
V.8bis Success............... Yes
V.8bis CRe,CRd,CL,MS,ACK,NAK. Yes/No/Yes/No/Yes/No
Remote Manufacturer.......... Rockwell (Conexant)
Remote Licensee Code......... Rockwell (Conexant)
Remote Protocol Support...... K56flex V.90
Remote K56flex Version....... 02
Remote K56flex Capabilities.. Prototype mode is not supported
Remote Type.................. Server (Digital)
Remote supports Symbol Rates. 2743 2800 3429 3000(L) 3000(H)
Remote supports Symbol Rates. 3200(L) 3200(H) 3429(Tx)
Remote supports Power Drop... Yes
Remote is CME Modem.......... No
Remote supports V.34bis...... Yes
Remote Max SR Difference..... 0 Symbol Rate Steps
Remote Frequency Source...... Internal
Error Correction Status Byte. SYNC UA:R SAMBE:T XID:T XID:R
Frames REJected, Last/Total.. 1/17
Frames Errors, Rx/Tx......... 17/1 (1,1%/0,1%)
Frames Count, Rx/Tx.......... 1531/802
Error Control Frame Size..... V.42 LAPM (128)
Error Control Timeouts....... 5
Error Control Link NAKs...... 1
Compression Dictionary Size.. V.42bis (2048)
Characters Received.......... 163443
Characters Sent.............. 67690
Average CPS, Rx/Tx........... 544/225
Characters Lost, Rx/Tx....... 0/0
Estimated Noise Level, -dBm.. 59